Design, fabrication and RF performances of two different types of piezoelectrically actuated Ohmic MEMS switches

In this paper, we have proposed, fabricated and characterized piezoelectrically actuated RF MEMS (radio-frequency micro-electro-mechanical system) switches. They have been designed to operate at a low operation voltage for advanced mobile/wireless handset applications. The proposed switches are largely composed of piezoelectric cantilever actuators with an Au contact electrode and CPW (coplanar wave) transmission lines suspended over the substrate. Two different types of RF MEMS switches have been suggested to find the better geometry. One has the structure of one single piezoelectric cantilever and a contact electrode attached to its edge with three hinges (type-A), and the other contains four piezoelectric cantilevers that are symmetrically combined through each hinge to support a centered contact electrode (type-B). The two different fabricated (type-A and type-B) RF MEMS switches have insertion losses of −0.22 and −0.23 dB at an operation voltage of 2.5 V and a frequency of 2 GHz, respectively. Although the difference in insertion loss is trivial, there exist different dependences of insertion loss on applied voltage between them. The insertion losses of type-A switches are changed with varying operation voltage because the touching area between the contact electrode and the signal transmission lines is variable. Meanwhile, the type-B switches show nearly constant insertion losses regardless of operation voltage. The type-A and type-B switches have isolation values of −40.8 and −42.5 dB at a frequency of 2 GHz, respectively.

Publication