Polyaziridine‐Encapsulated Phosphorene‐Incorporated Flexible 3D Porous Graphene for Multimodal Sensing and Energy Storage Applications
Heteroatom‐incorporated graphene represents a prominent family of materials utilized as active electrodes for multimodal sensing and energy storage applications. Herein, a novel polyaziridine‐encapsulated phosphorene (PEP)‐incorporated flexible 3D porous graphene (3DPG) electrode is developed using facile, cost‐effective laser writing, and drop‐casting techniques. Owing to the excellent electrochemical characteristics and surface functionality of the highly stable PEP, the fabricated PEP/3DPG is evaluated as a potential electrode for immunosensing, electrocardiogram (ECG) recording, and microsupercapacitors (MSCs). Under optimized conditions, the produced PEP/3DPG‐based carcinoembryonic immunosensor exhibits linear ranges of 0.1–700 pg mL−1 and 1–100 ng mL−1 with a detection limit of 0.34 pg mL−1 and high selectivity. The finger touch‐based ECG sensor demonstrates a relatively low and stable impedance at the skin‐electrode interface; therefore, the signal‐to‐noise ratio of the ECG signal received from the fabricated sensor (13.5 dB) is comparable to that of conventional Ag/AgCl electrodes (13.9 dB). Besides, the highest areal capacitance of the prepared MSC reached a magnitude of 16.94 mF cm−2, which is six times higher than that of a non‐doped 3DPG‐based MSC. These results demonstrate the effectiveness of the described fabrication procedure and the high utilization potential of the encapsulated phosphorene‐doped 3D graphene in multimodal applications.
Similar Publications:
In this study, a breathable and strain-insensitive multi-layered electronic skin (e-skin) capable of real-time detection and distinction of electrocardiogram...
Although metal-organic framework (MOF)-derived nanoporous C (NPC) materials offer several advantages for electrochemical sensor applications, surface functio...
The triboelectric nanogenerator (TENG) is a promising technology for self-powered sensors and vibration-driven energy harvesting...
While state-of-the-art skin-adhering fibrous electrodes have distinct benefits in personal wearable bioelectronics, considerable challenges persist in the pr...
Despite substantial progress in the development of wearable and flexible monitoring systems that conform to the epidermis, most designs focus on either physi...
Polymer nanofibers are widely adopted in energy harvesting and pressure sensing applications owing to the large contact area and inherent compressibility. He...
The contactless triboelectric nanogenerator with the capability of touchless interactions has become extremely fascinating for applications in health care, r...
Surface modification of triboelectric negative layers is an essential factor for boosting the output performance of triboelectric nanogenerators (TENGs). Her...
Hierarchically interactive 3D-porous soft carbon nanofibers (CNFs) have great potential for wearable bioelectronic interfaces, yet 90% of CNFs are derived fr...
Triboelectric nanogenerators (TENGs), which operate in contactless mode and avoid physical contact, are highly attractive for self-powered sensor systems aim...